Microscopia digital das pontas diamantadas para acabamento dos pinos intra radiculares pré-fabricados estéticos

Euripedes Netto dos Passos Jacinto, Dalila Miranda dos Santos, Rogério Vieira Reges, Denise Ramos Silveira Alves, Cristiane Bonanato, Alessandra Rossi, Natânia Martins Sabath

Resumo


Objetivo: O objetivo deste trabalho foi a avaliação por meio de imagens de microscopia digital utilizando diferentes tipos de acabamento. Métodos: Neste trabalho foram utilizados pinos de fibra de vidro de tamanho n.1, foram realizados acabamento com a seguintes pontas diamantadas: 3195, 3195F e 3195FF, formando um total de 4 grupos sendo grupo controle e os outros 3 pertencente a cada ponta diamantada respectivamente. Posteriormente foi analisado em Microscópio se houve alguma alteração em sua estrutura superficial. Resultados: No primeiro grupo foram realizados acabamentos com a ponta diamantada 3195F, apresentando então menor preservação da estrutura superficial do pino. No segundo grupo foram realizados acabamentos com a ponta diamantada 3195FF, apresentando assim variação quanto a preservação da estrutura superficial do pino. No terceiro grupo foram realizados acabamentos com a ponta diamantada 3195, obtendo assim melhor preservação da estrutura superficial do pino. Já o quarto grupo foi utilizado como grupo controle. Conclusão: A utilização da ponta diamantada 3195 apresentou maior padrão de homogeneidade e preservação da estrutura do material.

Palavras-chave


Pinos intracanal, Pinos fibra de vidro odontológico, Pinos odontológicos intracanal

Texto completo:

PDF

Referências


Maroli A, Hoelcher KAL, Reginato VF, Spazzin AO, Caldas RA, Bacchi A. Biomechanical behavior of teeth without remaining coronal structure restored with different post designs and materials. Mater Sci Eng C [Internet]. 2017;76:839–44. Available from: http://dx.doi.org/10.1016/j.msec.2017.03.152

Pereira JR, do Valle AL, Shiratori FK, Ghizoni JS, Bonfante EA.The effect of post material on the characteristic strength of fatigued endodontically treated teeth. J Prosthet Dent 2014;112:1225-30.

Pereira JR, Neto T de M, Porto V de C, Pegoraro LF, Valle AL. Influence of the remaining coronal structure on the resistance of teeth with intraradicular retainer. Braz Dent J 2005;16:197-201.

Bacchi A, Dos Santos MB, Pimentel MJ, Caetano CR, Sinhoreti MA, Consani RL. Influence of post-thickness and material on the fracture strength of teeth with reduced coronal structure. J Conserv Dent 2013;16:139-43.

Barcellos RR, Correia DP, Farina AP, Mesquita MF, Ferraz CC, Cecchin D. Fracture resistance of endodontically treated teeth restored with intra-radicular post: the effects of post system and dentine thickness. J Biomech 2013;46:2572- 7.

Moro M, Agostinho AM, Matsumoto W. Núcleos Metálicos Fundidos X Pinos Pré-Fabricados Cast Metal Posts X Pre-Fabricated Posts. PCL - Rev Ibero-americana Prótese Clínica e Lab [Internet]. 2005;167–72. Available from: http://www.dtscience.com/wp-content/uploads/2015/11/Núcleos-Metálicos-Fundidos-X-Pinos-Pré-Fabricados.pdf

Al-Omiri MK, Mahmoud AA, Rayyan MR, Abu-Hammad O. Fracture resistance of teeth restored with post-retained restorations: an overview. J Endod 2010;36:1439-49.

Love RM, Purton DG. Retention of posts with resin, glass ionomer and hybrid cements. J Dent 1998;26(7):599-602

Sirimai S, Riis DN, Morgano SM. An in vitro study of the fracture resistance and the incidence ofvertical root fracture of pulpless teeth restored with six post-and-coresystems. J Prosthet Dent 1999;81(3):262-9.

Shiozawa LJUN. Retenção de pinos pré-fabricados e núcleos metálicos fundidos cimentados com cimento resinoso e fosfato de zinco. J Prosthet Dent. 2005;12(2):248-54.

Bacchi A, Caldas RA, Schmidt D, Detoni M, Matheus Albino Souza, Cecchin D, et al. Fracture Strength and Stress Distribution in Premolars Restored with Cast Post-and-Cores or Glass-Fiber Posts Considering the Influence of Ferule. Biomed Res Int. 2019;2019:1-7.

Jakubonytė M, Česaitis K, Junevičius J. Influence of glass fibre post cementation depth on dental root fracture. Stomatologija. 2018;20(2):43–48.

Sen D, Poyrazoglu E, Tuncelli B. The retentive effects of pre-fabricated posts by luting cements. J Oral Rehabil. 2004;31(6):585–589.

Souza JR JA, Santos PH. Pinos pré-fabricados e sua cimentação- artigo de revisão. Robrac.2002; 11(32): 42-45.

Sá TCM,Akaki E, Sá JCM.Pinos Estéticos: Qual O Melhor Sistema? Arq Bras Odontol. 2010;6(3):179–184.

Sahafi A, Peutzfeldt A. Durability of the bond between resin composite cores and prefabricated posts. Acta Odontol Scand. 2009;67(5):271–276.

Elsaka SE, Elnaghy AM. Bonding durability of titanium tetrafluoride treated glass fiber post with resin cement. Dent Mater J. 2019;38(2):189–195.

Dionysopoulos P, Skolianos S, Papadogiannis Y. A study of the microstructure of some dental retention pins and prefabricated root canal posts. J Oral Rehabil. 1995;22(1):29–35.

Muttlib NAA, Azman ANP, Seng YT, Alawi R, Ariffin Z. Intracanal Adaptation of a Fiber Reinforced Post System as Compared to a Cast Post-and-Core. Acta Stomatol Croat. 2016;50(4):329–336.

Mazaro JVQ, Assunção WG, Rocha EP, Zuim PRJ, Gennari Filho H. Factors determining of intraradicular post selection. Rev Odontol UNESP. 2006; 35(4): 223-231.


Apontamentos

  • Não há apontamentos.


visitas

Indexadores: